RMS LOGO 2.jpg (89754 bytes)

3 Saber Way

PO Box 8351

Ward Hill, MA 01835

1-800-581-0212

 

xp.jpg (2562 bytes)

An in-line radon fan is the most important component of a subslab radon mitigation system. Choice of model is dependent on certain building characteristics and should be made by a radon professional.


gp.jpg (4844 bytes)

 

RADON MITIGATION SYSTEM COMPONENT
RADON FAN

Acting as a suction device, the radon fan is connected to PVC plastic pipes drawing the radon gas from below the house and releasing it safely into the outdoor air above the roofline.  A radon fan must run continuously in order to effectively reduce the level of radon in the air.

A good radon fan is designed specifically for radon mitigation systems.  A good quality radon fan should be ultra-quiet and will provide years of superb performance for the homeowner.

A well designed radon mitigation system, installed by a qualified radon mitigation contractor, should be non-intrusive and blend in well with the architectural design of the home.

On average it cost between 25 and 50 cents to operate a radon fan per day.  The operation cost depends on the model fan required for your system and your local utility rates.

  

Return to Home              Program Overview            FAQ's           Link to EPA